BROCHURE
MOHAMED ELGAWADY is a Professor,Missouri University of Science and Technology ,United States

MOHAMED ELGAWADY

Professor

Organizing Committee Member

United States

Missouri University of Science and Technology

PUBLICATIONS

Journals

Published/Accepted (97 Journal Papers - Underline denotes corresponding author)

Papers Linked to Repair, Resiliency, and Large-scale Testing of Infrastructure Members (75 papers)

  1. Abdulazeez*, M., and ElGawady, M. A., 2020. “Seismic behavior of hollow-core composite bridge columns having slender inner steel tubes” American Concrete Institute Structural J., ACI, 117(3), 1:16.
  2. Elmapruk*, J., ElGawady, M. A., Hassanli*, R., 2020. “Experimental and analytical study on the shear strength of partially grouted masonry walls” Journal of Structural Engineering, ASCE, 146 (8), 04020147-1:17.
  3. Carter*, J. D., Abdulazeez*, M., ElGawady, M. A., and Khayat, K. H., 2020. “FRP confinement of SCC incorporating expansive agent and saturated lightweight sand” Construction and Building Material, 252, 118924.
  4. Abdulazeez*, M., Brown****, K., and ElGawady, M. A., 2020. “Shear bond strength of steel H-piles repaired using polymer concrete jacket encasement” Transportation Research Record, 1 – 11.
  5. Nain*, M., Abdulazeez*, M., and ElGawady, M. A., 2020. “Behavior of High Strength Concrete - Filled Hybrid Large - Small Rupture Strains FRP Tubes” Engineering Structures, 209, Article Number 110264.
  6. Gomaa*, E., Gheni*, A., ElGawady, M. A., 2020. “Repair of ordinary Portland cement concrete using ambient-cured alkali-activated concrete: Interfacial behavior” Cement and Concrete Research, 129, Article Number 105968.
  7. Darwish*, Y., ElGawady, M. A., 2019. “Analysis of metamaterial bi-stable elements as energy dissipation systems” Bridge Structures 15 (4), 151-159.
  8. Yacob*, N., ElGawady, M. A., Sneed, L., and Said, A., 2019 “Shear strength of fly ash-based geopolymer reinforced concrete beams” Engineering Structures, 196, Article Number 109298.
  9. Abdulazeez*, M., ElGawady, M. A., and Abdelkarim*, O., 2019. “Bending and buckling behavior of hollow-core FRP-concrete-steel columns” J. Bridge Engineering, ASCE, 24(8).
  10. Al-Jaberi***, Z., Myers, J., and ElGawady, M. A., 2019. “Experimental and analytical approach for prediction of out-of-plane capacity of reinforced masonry walls strengthened with externally-bonded FRP laminate" J. Composites for Construction, ASCE, 23(4).
  11. Rai*, M., ElGawady, M. A., Rodriguez-Marek, A. 2019. “Probabilistic seismic demand analysis of a bridge with unbonded, post-tensioned, concrete-filled, fiber-reinforced polymer tube columns” Fibers, 7(3), 1- 23.
  12. Gomaa*, E., Gheni*, A., Kashosi*, C., ElGawady, M. A., 2019. “Bond strength of eco-friendly class C fly ash-based thermally cured alkali-activated concrete to Portland cement concrete” Journal of Cleaner Production, 235, 404 – 416.
  13. Abdulazeez*, M., Gheni*, A., Abdelkarim*, O., and ElGawady, M. A., 2018. “Column-footing connection evaluation of hollow-core composite bridge columns” American Concrete Institute (ACI), Special Publication, 327, 39.1:14.
  14. Al-Jaberi***, Z., Myers, J., and ElGawady, M. A., 2018. “Evaluation of FRP and FRCM composites for the strengthening of reinforced masonry walls." American Concrete Institute (ACI), Special Publication, 327, 32.1:16.
  15. Al-Jaberi***, Z., Myers, J., and ElGawady, M. A., 2018. “Out-of-plane flexural behavior of reinforced masonry walls strengthened with NSM FRP." American Concrete Institute, ACI Structural Journal, 115(4), 997-1010.  
  16. Abdelkarim*, O., Gheni*, A., Anumolu*, S., and ElGawady, M. A., 2018. “Hollow-core FRP-concrete-steel tubular columns subjected to seismic loading” American Concrete Institute, American Concrete Institute (ACI) Special Publication, 322, 12.1-12.16.
  17. Moustafa*, A. and ElGawady, M. A., 2018. “Shaking table testing of segmental hollow-core FRP-concrete-steel bridge columns” J. Bridge Engineering, ASCE, 23(5).
  18. Al-Jaberi***, Z., Myers, J., and ElGawady, M., 2018. “Pseudo-Static Cyclic Loading Comparison of Reinforced Masonry Walls Strengthened with FRCM or NSM FRP." Construction and Building Materials, 167, 482 – 495.
  19. Abdelkarim*, O., ElGawady, M. A., Anumolu*, S., Gheni*, A., and Sanders, G. 2018. “Behavior of hollow-core FRP-concrete-steel columns under static cyclic flexural loading” Journal of Structural Engineering, ASCE, 144(2), 04017188-1:16.
  20. Abdelkarim*, O., and ElGawady, M. A., 2017 (Invited). “Seismic performance of hollow-Core composite bridge columns” International Journal of Bridge Engineering, Special Issue: Experimental and Analytical Investigations With Emerging Bridge Design Methods, 1-24.
  21. Anumolu*, S., Abdelkarim*, O., Abdulazeez*, M., Gheni*, A., and ElGawady, M. A., 2017 (Invited – Cover page of the issue). “Hollow-core FRP-concrete-steel bridge columns under torsional loading” Fibers, 5(4), 44.
  22. Alabdulhady***, M., Abdelkarim*, O., Sneed, L., ElGawady, M., 2017. “Finite element study on the behavior of RC beams strengthened with PBO-FRCM composite under torsion” Composite Structures, 179, 326-339.
  23. Moustafa*, A., Gheni*, A., and ElGawady, M. A., 2017. “Shaking-Table Testing of High Energy–Dissipating Rubberized Concrete Columns” ASCE J. Bridge Engineering, 22(8), 04017042-1:13.
  24. Hassanli**, R., ElGawady, M. A., and Mills, J. E., 2017 “Simplified approach to predict the flexural strength of self-centering masonry walls”. Engineering Structures J., Vol. 142, 255 – 271.
  25. Abdelkarim*, O., and ElGawady, M. A., 2017. “Performance of bridge piers under vehicle collision” Engineering Structures J., Vol. 140, 337 – 352.
  26. Hassanli**, R., ElGawady, M. A., and Mills, J. E. 2017. “In-plane flexural strength of unbonded post-tensioned concrete masonry walls” Engineering Structures J., Vol. 136, 245 – 260.
  27. Abdelkarim*, O., and ElGawady, M. A., Gheni*, A., Anumolu*, S., Abdulazeez*, M., 2017. “Seismic performance of innovative hollow-core FRP-concrete-steel bridge columns” J. Bridge Engineering, ASCE, Vol. 22(2), 04016120-1:15.
  28. Abdelkarim*, O., and ElGawady, M. A., 2016 (Invited). “Dynamic and static behavior of hollow-core FRP-concrete-steel and reinforced concrete bridge columns under vehicle collision” Polymers J., Vol. 8 (12), 432 – 449.
  29. Abdelkarim*, O., and ElGawady, M. A., 2016. “Performance of hollow-core FRP-concrete-steel bridge columns subjected to vehicle collision” Engineering Structures, Vol. 123, 517-531.
  30. Abdelkarim*, O., and ElGawady, M. A., 2016. “Behavior of hollow FRP-concrete-steel columns under static cyclic axial compressive loading” Engineering Structures, Vol. 123, 77 – 88.
  31. Anumolu*, S., and Abdelkarim*, O., and ElGawady, M. A., 2016. “Behavior of hollow-core steel-concrete-steel columns subjected to torsion loading” J. Bridge Engineering, ASCE, 21(10), 04016070-1:14.
  32. Ichikawa, S., Matsuzaki, H., Moustafa*, A., ElGawady, M. A., Kawashima, K. 2016. “Seismic-resistant bridge columns with ultrahigh-performance concrete segments” J. Bridge Engineering, ASCE, 21(9), 04016049-1:16.
  33. Abdelkarim*, O. I., ElGawady, M. A., 2016. “Design of short reinforced concrete bridge columns under vehicle collision” Transportation Research Record J., 27 – 37.
  34. Tuwair**, H., Volz, J., ElGawady, M. A., Chandrashekhara, K., Birman, V., 2016. “Modeling and analysis of GFRP bridge deck panels filled with polyurethane foam” J. Bridge Engineering, ASCE, 21(5), 04016012-1:14.
  35. Tuwair**, H., Volz, J., ElGawady, M. A., Chandrashekhara, K., Birman, V., 2016. “Behavior of GFRP bridge deck panels infilled with polyurethane foam under various environmental exposure” Structures J., 5, 141-151.
  36. Hassanli**, R., ElGawady, M. A., and Mills, J. E., 2016. “Force-displacement behavior of unbonded post-tensioned concrete walls” Engineering Structures, 106, 495 – 505.
  37. Fakhrifar***, M., Chen, G., Wu, C., Shamsabadi, A., ElGawady, M. A., Dalvand, A., 2016. “Rapid repair of earthquake-damaged RC columns with prestressed steel jackets” J. Bridge Engineering, ASCE, 21(4), 04015075-1:15.
  38. Tuwair**, H., Volz, J., ElGawady, M. A., Mohaned, M., Chandrashekhara, K., Birman, V., 2016. “Testing and evaluation of polyurethane-based GFRP sandwich bridge deck panels with polyurethane foam core” J. of Bridge Engineering, ASCE, 21(1), 04015033-1:13.
  39. Hassanli**, R., ElGawady, M. A., and Mills, J. E., 2016. “Experimental investigation of in-plane cyclic response of unbonded posttensioned masonry walls” J. of Structural Engineering, ASCE, 142(5), 04015171-1:15.
  40. Youssf**, O., ElGawady, M. A., Mills, J., 2016. “Static cyclic behaviour of FRP-confined crumb rubber concrete columns” Engineering Structures, Vol. 113, 371–387. (Top 20 most cited papers in the Engineering Structure J. Since 2016).
  41. Youssf**, O., ElGawady, M. A., Mills, J., 2015. “Displacement and plastic hinge length of for FRP-confined circular reinforced concrete columns” Engineering Structures, 101, 456:476.
  42. Hassanli**, R., ElGawady, M. A., and Mills, J. E. 2015. “Strength and seismic performance factors of posttensioned masonry walls” J. of Structural Engineering, ASCE, 141 (11), 04015038-1: 04015038-15.
  43. Abdelkarim*, O., and ElGawady, M. A., 2015. “Concrete-filled-large deformable FRP tubular columns under axial compressive loading” Fibers J., 3, 432-449.
  44. Hassanli**, R., ElGawady, M. A., and Mills, J. E., 2015. “Effect of dimensions on the compressive strength of concrete masonry prisms” Advances in Civil Engineering Material, ASTM, 4(1), 1–27.
  45. Tuwair**, H., Hopkins, M., Volz, J., ElGawady, M. A., Mohaned, M., Chandrashekhara, K., Birman, V., 2015. “Evaluation of sandwich panels with various polyurethane foam-cores and ribs” Composites Part B: Engineering, 79, 262-276.
  46. Fakharifar***, M., Chen, G., Arezoumandi, M., ElGawady, M. A., 2015, “Hybrid jacketing for rapid repair of seismically damaged reinforced concrete columns” Transportation Research Record J., 70 – 78.
  47. Abdelkarim*, O., and ElGawady, M. A., 2015. “Analytical and finite-element modeling of FRP-concrete-steel double-skin tubular columns” J. Bridge Engineering, ASCE, 20(8), B4014005.
  48. Youssf**, O., ElGawady, M. A., Mills, J., 2015. “Experimental investigation of crumb rubber concrete columns under seismic loading” Structures J., 3, 13:27.
  49. Youssf**, O., ElGawady, M. A., Mills, J. E., Ma, X., 2014. “An experimental investigation of crumb rubber concrete confined by fibre reinforced polymer tubes” Construction and Building Materials, 53, 522–532.
  50. Dawood*, H., ElGawady, M. A., and Hewes, J., 2014. “Factors affecting the seismic behavior of segmental precast bridge columns”, Frontiers of Structural and Civil Engineering J., 8(4), 388-398, DOI: 10.1007/s11709-014-0264-8.
  51. Ryu****, D., Wijeyewickrema, A. C. and ElGawady, M., Madurapperuma, M. A. K. M., 2014. "Effects of tendon spacing on in-plane behavior of posttensioned masonry walls", J. of Structural Engineering, ASCE, 140(4), 04013096-1: 04013096-13.
  52. Hassanli**, R., ElGawady, M. A., and Mills, J. E. 2014. “An evaluation of design code expressions for estimating in-plane shear strength of partially grouted masonry walls” Australian J. of Structural Engineering, 15(3), 299-315.
  53. Farooq***, H.; ElGawady M. A; Ilyas, M. 2014. “Seismic in-plane performance of retrofitted masonry walls”, J. of Civil Engineering, Korean Society of Civil Engineering, KSCE, 18(1), pp. 226-237.
  54. Youssf**, O., ElGawady, M. A., Mills, J. E., Ma, X., 2014. “Finite element modelling and dilation of FRP-confined concrete columns” Engineering Structures, 79 (15), 70-85.
  55. Pant***, D., Wijeyewickrema, A., and ElGawady, M., 2013. “Appropriate viscous damping for nonlinear time-history analysis of base-isolated reinforced concrete buildings” J. Earthquake Engineering and Structural Dynamics, 42(15), pp. 2321–2339.
  56. Ichikawa***, S., Nakamura***, K., Matsuzaki***, H., ElGawady, M., Kanamitsu, Y., Yamanobe, S., and Kawashima, K., 2013. “Enhancement of the seismic performance of bridge columns using ultra high strength fiber reinforced concrete segments” J. of Japan Society of Civil Engineers A1, 69(4), ISSN: 2185-4653.
  57. Dawood*, H., and ElGawady, M. A., 2013. “Performance-based seismic design of unbonded precast post-tensioned concrete filled GFRP tube piers” Composites Part B: Engineering, 44(1), pp. 357-367.
  58. Ichikawa***, S., Zhang**, R., Sasaki, T., Kawashima, K., ElGawady, M., Matsuzaki, H., and Yamanobe, S., 2012. "Seismic performance of UFC segmental columns" J. of Japan Society of Civil Engineering A1, 68(4), 533-542 (In Japanese).
  59. ElGawady, M. A. and Dawood*, H. 2012. “Analysis of segmental piers consisted of concrete filled FRP tubes”, Engineering Structures, 38, pp. 142-152.
  60. ElGawady, M. A., and Nolph*, S., 2012. “Static cyclic response of partially grouted masonry shear walls”, J. Structural Engineering, ASCE, 138(7), 864-879.
  61. Dawood*, H., ElGawady, M. A., and Hewes, J. 2012. “Behavior of Segmental Precast Post-Tensioned Bridge Piers under Lateral Loads”, J. Bridge Engineering, ASCE, 17(5), 735-746.
  62. ElGawady, M. A. and Shafiei*, R., 2011. “Pushover analysis of the I-5 Ravenna bridge”, Electronic J. of Structural Engineering, 11(1), 32-41.
  63. ElGawady, M. A., and Sha’lan*, A., 2011. “Seismic behavior of self-centering precast segmental bridge bents”, J. Bridge Engineering, ASCE, 16(3), 328-339, (3rd most cited paper on the ASCE Bridge J.).
  64. ElGawady, M. A., Ma, Q., Ingham, J., and Butterworth J., 2011. “Effects of interface material on the performance of free rocking blocks”, J. Earthquake Engineering and Structural Dynamics, 40(4), 375-392.
  65. Sehhati***, R., Rodriguez-Marek, A., ElGawady, M., Cofer, W. 2011. “Effects of near-fault ground motions and equivalent pulses on multi-story structures” J. Engineering Structures, 33(3), 767-779.
  66. ElGawady, M. A., Booker*, A. J., and Dawood*, H., 2010. “Seismic behavior of posttensioned concrete-filled fiber tubes”, J. Composites for Construction, ASCE, 14(5), pp. 616-628.
  67. ElGawady, M. A., Endeshaw*, M., McLean, D., and Sack R., 2010. “Retrofitting of rectangular columns with deficient lap splices”, J. Composites for Construction, ASCE, 14(1), pp. 1-14.
  68. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2007 “Static cyclic response of masonry walls retrofitted with fiber reinforced polymers”, J. of Composites for Const., ASCE, 11(1), pp. 50-61.
  69. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2006. “Shear strength of URM walls retrofitted using FRP”, Engineering Structures, 28(12), pp. 1658-1670.
  70. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2006. “Analytical model for the in-plane shear behavior of URM walls retrofitted with FRP”, J. of Composites Science and Technology, 66(3-4), pp. 459-474.
  71. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2006. “Aseismic retrofitting of unreinforced masonry walls using FRP”, Composites Part B: Engineering, 37(2-3), pp. 148-162 (Top 25 hottest articles January - March 2006, ScienceDirect Website).
  72. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2005. “Performance of URM walls under in-plane seismic loading”, The Masonry Society (TMS) J., 28 (1), pp. 95-114.
  73. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2005. “In-plane seismic response of URM walls upgraded with FRP”, J. Composites for Const., ASCE, 9(6), pp. 524-535.

Papers Linked to Sustainability and Durability of Infrastructure Materials (22 papers)

  1. Wang, S* and ElGawady, M. A., 2020. “Effects of accelerated seawater corrosion on CFFT stubs subjected to sustained axial load” American Concrete Institute Materials J., ACI (Accepted).
  2. Gomaa*, E., Sargon*, S., Kashosi*, C., Gheni*, A., ElGawady, M. A., 2020. “Mechanical Properties of High Early Strength Class C Fly Ash-Based Alkali Activated Concrete” Transportation Research Record, 2674 (5), 430-443.
  3. Wang, S* and ElGawady, M. A., 2020. “Effects of accelerated seawater corrosion on hollow-core FRP-concrete-steel columns under sustained axial load” J. Composites for Construction, ASCE, 24(3), 04020017
  4. Gomaa*, E., Gheni*, A., ElGawady, M. A., 2019. “Durability of class C fly ash-based alkali activated concrete” American Concrete Institute (ACI) Special Publication 334, 185 - 204.
  5. Gheni*, A., ElGawady, M. A., 2019. “Recycled additive to improve freeze-thaw durability of high fly ash content mortar” American Concrete Institute (ACI) Special Publication 334, 166 - 184.
  6. Chennareddy, R., Tuwair*, H., Kandil, U., ElGawady, M. A, Reda Taha, M., 2019. “UV-resistant GFRP composite using carbon nanotubes” Construction and Building Materials, 220, 679 – 689.
  7. Gheni*, A., Alghazali***, H., ElGawady, M. A., Myers, J. J., and Feys, D., 2019. “Durability properties of cleaner cement mortar with by-products of tire recycling” J. of Cleaner Production, 213, 1135 – 1146.
  8. Wang*, S., and ElGawady, M. A., 2019. “Durability of hollow-core GFRP-concrete-steel Columns under Severe Weather Conditions” J. Composites for Construction, ASCE, 23(1), 04018078-1:23.
  9. Wang*, S., and ElGawady, M. A., 2019. “Effects of hybrid water immersion, environmental exposures, and axial load on the mechanical properties of concrete filled epoxy-based glass fiber reinforced polymer tubes” Construction and Building Materials, 194, 311 - 321.
  10. Wang*, S., and ElGawady, M. A., 2018. “Effects of combined environmental exposures and axial load on CFFT" Construction and Building Materials, 184, 524 - 535.
  11. Liu, X***, Wang, J., Gheni*, A., ElGawady, M. A., 2018. “Reduced zinc leaching from scrap tire during pavement applications” Waste Management J., 81, 53-60.
  12. Gheni*, A., Lusher, M., ElGawady, M. A., 2018. “Retention behavior of crumb rubber as an aggregate in innovative chip seal surfacing” J. of Cleaner Production, 197, 1124 - 1136.
  13. Gheni*, A., Liu, X***, ElGawady, M. A., Shi, H., Wang, J., 2018. “Leaching assessment of eco-friendly rubberized chip seal pavement” Transportation Research Record J., 1- 11, DOI: 10.1177/0361198118758688.
  14. Gheni*, A., Abdelkarim*, O., Abdulazeez*, M., ElGawady, M. A., 2017. “Texture and design of green chip seal using recycled crumb rubber aggregate” J. of Cleaner Production, 166, 1084-1101.
  15. Gomaa*, E., Sargon*, S., Kashosi*, C., ElGawady, M. A., 2017 (Invited). “Fresh properties and compressive strength of high calcium alkali-activated fly ash mortar” J. of King Saud University - Engineering Sciences, 29(4), 356-364.
  16. Gheni*, A. ElGawady, M. A., Myers, J., 2017. “Thermal characterization of cleaner and eco-efficient masonry units using sustainable aggregates” J. of Cleaner Production, 165, 980 – 993.
  17. Youssf**, O., ElGawady, M. A., Mills, J., Ma, X., 2017. “Analytical modeling of the main characteristics of crumb rubber concrete” American Concrete Institute (ACI) Special Publication, 314, 1-18.
  18. Moustafa*, A. and ElGawady, M. A., 2017. “Dynamic properties of high strength rubberized concrete” American Concrete Institute (ACI) Special Publication, 314, 1 - 22.
  19. Gheni*, A. ElGawady, M. A., Myers, J., 2017. “Mechanical characterization of concrete masonry units manufactured with crumb rubber aggregate” American Concrete Institute ACI, Materials J., Vol. 114 (1), 65 – 76.
  20. Said, A.M., Quiroz, O. I., Hatchett, D.W., and ElGawady, M. A., 2016. “Latex-modified concrete overlays using waste paint” Construction and Building Materials, Vol. 123, 191-197.
  21. Moustafa*, A. and ElGawady, M. A., 2016. “Strain rate effect on properties of rubberized concrete confined with glass fiber–reinforced polymers”, J. Composites for Construction, ASCE, 20(5), 04016014-1:13.
  22. Moustafa*, A. and ElGawady, M. A., 2015. “Mechanical properties of high strength concrete with scrap tire rubber” Construction and Building Materials, 93, 249-256.

Conference Proceedings (136 papers)

  1. Colbet*, N., Abdulazeez*, M., ElGawady, M. A., 2019. “Perturbation-based analysis of thin-walled steel tubes buckling under compression: numerical and experimental study” 1st Joint International Conference on Design and Construction of Smart City Components, Cairo, Egypt, December 17th – 19th.
  2. Gomaa*, E., Gheni*, A., ElGawady, M. A., 2019.  “Effect of calcium content of class C fly ashes on the mechanical properties of alkali activated concrete” 1st Joint International Conference on Design and Construction of Smart City Components, Cairo, Egypt, December 17th – 19th.
  3. Ramadan*, A., ElGawady, M. A., 2019. “Axial Behavior of Concrete Filled Pultruded FRP Box” 1st Joint International Conference on Design and Construction of Smart City Components, Cairo, Egypt, December 17th – 19th.
  4. Islam*, M., Gheni*, A., ElGawady, M. A., 2019. “Fresh and mechanical properties of zero-cement one-part geopolymer mortar and concrete” IABSE Congress, New York City, NY, USA, Sept. 4th – 6th.
  5. Pourhassan*, A., Gheni*, A., ElGawady, M. A., 2019. “Effect of aggregate size on the retention of conventional and rubberized chip seal” IABSE Congress, New York City, NY, USA, Sept. 4th – 6th.
  6. Ramadan*, A., ElGawady, M. A., 2019. “Axial behavior of corroded H-Piles” IABSE Congress, New York City, NY, USA, Sept. 4th – 6th.
  7. Gomaa*, E., Sargon*, S., Gheni*, A., Kashosi*, C., ElGawady, M. A., 2019.  “Influence of water, alkali activators, and curing regime on the workability and compressive strength of the alkali activated mortar” IABSE Congress, New York City, NY, USA, Sept. 4th – 6th.
  8. Darwish*, Y., ElGawady, M. A., 2019. “Impact protection of bridges using negative stiffness metamaterial systems” 10th New York City Bridge Conference, New York City, NY, USA, Aug. 26th -27th.
  9. Abdulazeez*, M., Sherstha*, B., ElGawady, M. A., 2019. “Retrofit of corroded steel H-piles using concrete encased in CFRP” 10th New York City Bridge Conference, New York City, NY, USA, Aug. 26th -27th.
  10. Abdulazeez*, M., ElGawady, M. A., 2019. “Seismic retrofit of hollow- core composite bridge columns having inner steel tube with high diameter to thickness ratio” 10th New York City Bridge Conference, New York City, NY, USA, Aug. 26th -27th.
  11. Ahdaya, M, Imqam, A., Jani, P., Fakher, S., ElGawady, M. A., 2019. “New formulation of fly ash class C based geopolymer for oil well cementing” International Petroleum Technology Conference, Beijing, China, Mar. 26th – 28th.
  12. Gomaa*, E., Gheni*, A., Kashosi*, C., ElGawady, M. A., 2019.  “Bond strength of Portland cement concrete repairs using class C fly ash-based alkali activated concrete” Transportation Research Board (TRB), Washington DC, Jan. 13th – 17th.
  13. Wang*, S., and ElGawady, M. A., 2019. “Durability performance of epoxy-based and polyester-based CFFTs subjected to harsh weather exposure and axial load”. Transportation Research Board (TRB), Washington DC, Jan. 13th – 17th.
  14. Moustafa*, A., Darwish, Y., Dawood, H., ElGawady, M. A., 2019. “Finite element modeling of segmental unbonded post-tensioned bridge columns under ground motion excitations” Transportation Research Board (TRB), Washington DC, Jan. 13th – 17th.
  15. Abdulazeez*, M., Sherstha*, B., Gomaa*, E., Ramadan*, A., ElGawady, M. A., 2019. “Bond behavior of steel bridge H-pile columns encased in concrete jackets” Transportation Research Board (TRB), Washington DC, Jan. 13th – 17th.
  16. Gheni*, A., ElGawady, M. A., 2018. “Sustainable mortar with double recycled rubber for new applications” 3rd R N RAIKAR Memorial International Conference & GETTU-KODUR International Symposium on Advances in Science and Technology of Concrete, Mumbai, India, Dec. 14th – 15th.
  17. Sargon*, S., Gomaa*, E., Kashosi*, C., Gheni*, A., ElGawady, M. A., 2018. “Thermal curing efficiency of geopolymer mortar” 3rd R N RAIKAR Memorial International Conference & GETTU-KODUR International Symposium on Advances in Science and Technology of Concrete, Mumbai, India, Dec. 14th – 15th.  
  18. Darwish, Y*, ElGawady, M. A., 2018. “Behavior of negative stiffness metamaterial energy dissipation systems” 15th International Conference on Structural and Geotechnical Engineering, Cairo, Egypt, Dec. 18th – 20th.
  19. Hassanli**, O, ElGawady, M. A., Mills, J. M., 2018. “A note on the MSJC 2016 strength prediction and ductility criteria for prestressed masonry” 10th International Masonry Conference (10th IMC), Milan, Italy, July 9th – 11th.
  20. Gomaa*, E., Sargon*, S., Gheni*, A., ElGawady, M. A., 2018.  “Mechanical properties of alkali activated concrete based class C fly ash” 9th International Conference on Bridge Maintenance, Safety, and Management, Melbourne, Australia, July 9th – 13th.
  21. Abdulazeez*, M., Gheni*, A., Colbet*, N., ElGawady, M. A., 2018. “Seismic performance and retrofit evaluation of hollow-core composite bridge columns” 9th International Conference on Bridge Maintenance, Safety, and Management, Melbourne, Australia, July 9th – 13th.
  22. Abdulazeez*, M., Gheni*, A., Colbet*, N., ElGawady, M. A., 2018. “Inelastic response evaluation of precast composite columns under seismic loads” 11th U.S. National Conference Earthquake Engineering, LA, CA., June 25th – 29th.
  23. Abdulazeez*, M., ElGawady, M. A., 2018. “Three-dimensional numerical analysis of hollow-core composite building columns” 16th International Congress on Polymers in Concrete (ICPIC 2018), Washington DC, Apr. 29th – May. 1st, 635-643.
  24. Abdulazeez*, M., ElGawady, M. A., 2018. “Flexural rigidity evaluation of seismic performance of hollow-core composite bridge columns” 16th International Congress on Polymers in Concrete (ICPIC 2018), Washington DC, Apr. 29th – May. 1st, 627-634.
  25. Gomaa*, E., Sargon*, S., Kashosi*, C., Gheni*, A., ElGawady, M. A., 2018.  “Effect of different class C fly ash compositions on the properties of the alkali-activated concrete” 16th International Congress on Polymers in Concrete (ICPIC 2018), Washington DC, Apr. 29th – May. 1st, 541 - 547.
  26. Sargon*, S., Gomaa*, E., Kashosi*, C., ElGawady, M. A., Gheni*, A., 2018.  “Effect of curing temperatures on zero-cement alkali-activated mortars” 16th International Congress on Polymers in Concrete (ICPIC 2018), Washington DC, Apr. 29th – May. 1st, 549 - 555.
  27. Wang*, S., and ElGawady, M. A., 2018. “The Influences of Mechanical Load on Concrete-Filled FRP Tube Cylinders Subjected to Environmental Corrosion” 16th International Congress on Polymers in Concrete (ICPIC 2018), Washington DC, Apr. 29th – May. 1st, 593 - 599.
  28. Abdulazeez*, M., ElGawady, M. A., 2018. “Seismic performance of hollow-core HC-FCS columns having inner steel tube with high diameter-to-thickness ratio” Transportation Research Board (TRB), Washington DC, Jan. 9 - 12.
  29. Nain*, M., Abdulazeez*, M., ElGawady, M. A., 2017. “Behavior of concrete-filled hybrid large rupture strain FRP tubes under cyclic axial compression” Congrès International de Géotechnique - Ouvrages –Structures, Ho Chi Minh City, Vietnam, Oct. 26 – 27.
  30. Abdulazeez*, M., ElGawady, M. A., 2017. “Seismic performance of hollow-core composite columns under cyclic loading” Congrès International de Géotechnique - Ouvrages –Structures, Ho Chi Minh City, Vietnam, Oct. 26 – 27.
  31. Gheni*, A., ElGawady, M. A., 2017. “Crumb rubber as a sustainable aggregate in chip seal pavement” Congrès International de Géotechnique - Ouvrages –Structures, Ho Chi Minh City, Vietnam, Oct. 26 – 27.
  32. Gomaa*, E., Sargon*, S., Kashosi*, C., ElGawady, M. A., 2017. “Fresh properties and early compressive strength of alkali-activated high calcium fly ash paste” Congrès International de Géotechnique - Ouvrages –Structures, Ho Chi Minh City, Vietnam, Oct. 26 – 27.
  33. Wang*, S., and ElGawady, M. A., 2017. “Durability of polyester-based GFRP subjected to hybrid environmental and mechanical loads” Congrès International de Géotechnique - Ouvrages –Structures, Ho Chi Minh City, Vietnam, Oct. 26 – 27.
  34. Anumolu, S., Abdelkarim, O. A., Abdulazeez, M. A., Gheni, A., and ElGawady, M. A., 2017. “Torsional behavior of hollow-core FRP-concrete-steel bridge columns” 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR), Zurich, Sept. 13th – 15th.
  35. Nain*, M., Abdulazeez*, M., ElGawady, M. A., 2017. “Cyclic compressive behavior of concrete-filled hybrid large rupture strain FRP tubes” 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR), Zurich, Sept. 13th – 15th.
  36. Abdulazeez*, M., ElGawady, M. A., 2017. “Nonlinear analysis of hollow-core composite building columns” 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR), Zurich, Sept. 13th – 15th.
  37. Abdulazeez*, M., ElGawady, M. A., 2017. “Seismic behavior of precast hollow-core FRP-concrete-steel column having socket connection” 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR), Zurich, Sept. 13th – 15th.
  38. Al-Jaberi***, Z., Myers, J., and ElGawady, M. 2017. “Seismic performance of reinforced masonry walls strengthened with frcm subjected to cyclic loading” 13th Canadian Masonry Symposuim, Halifax, Canada, June 4-7.
  39. Al-Jaberi***, Z., Myers, J., and ElGawady, M. 2017. “Performance of reinforced masonry walls strengthened with FRP composite exposed to combined environmental conditions” 13th Canadian Masonry Symposuim, Halifax, Canada, June 4-7.
  40. Hassanli**, O, ElGawady, M. A., Mills, J. M., 2017. “Comparison of available expressions in predicting the flexural strength of self-centring masonry walls” 13th Canadian Masonry Symposuim, Halifax, Canada, June 4-7.
  41. Gheni*, A., ElGawady, M. A., and Myers, J. 2017. “Thermal characterization of concrete masonry units manufactured using recycled tires as an aggregate” 13th Canadian Masonry Symposuim, Halifax, Canada, June 4-7.
  42. Gheni*, A., ElGawady, M. A., and Myers, J. 2017. “Cyclic behavior of concrete masonry units manufactured with recycled tires as an aggregate” 13th Canadian Masonry Symposuim, Halifax, Canada, June 4-7.
  43. Moustafa*, A., ElGawady, M. A., 2017. “Seismic behavior of a damage-resistant segmental bridge column with external energy dissipaters” Transportation Research Board (TRB), Washington DC, Jan. 11- 15.
  44. Abdulazeez*, M., Abdelkarim*, O., Gheni*, A., ElGawady, M. A., and Sanders, G., 2017. “Effects of footing connection on the performance of precast hollow-core fiber reinforced polymer-concrete-steel columns” Transportation Research Board (TRB), Washington DC, Jan. 11- 15.
  45. Wang*, S., and ElGawady, M. A., 2017. “Combined seawater exposure and axial cyclic load behavior of concrete-filled FRP tube (CFFT)” 16th World Conference Earthquake Engineering, Santiago, Chile, Jan 9 -13.
  46. Al-Jaberi***, Z., Myers, J., and ElGawady, M. 2017. “Effectiveness of FRCM system in strengthening reinforced masonry walls subjected to cyclic loading”, 39th IABSE Symposium, Vancouver, Canada.
  47. Al-Jaberi***, Z., Myers, J., and ElGawady, M. 2016. “Flexural capacity of out-of-plane reinforced masonry walls strengthened with externally bonded (EB) FRP” 7th International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS-VII), Vancouver, Canada, August 22-24.
  48. Chenna***, R., Genedy***, M., Reda Taha, M., Tuwair*, H., and ElGawady, M. 2016. “Improving UV radiation resistance of FRP using carbon nanotubes” 7th International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS-VII), Vancouver, Canada, August 22-24.
  49. Gheni*, A., Aljaberi***, Z. K., ElGawady, M. A., Myers, J., 2016. “Energy efficiency and thermal characterization of Eco-friendly wood fibre masonry blocks” 16th International Brick and Block Conference, Padova, Italy, June 26 – 30.
  50. Aljaberi***, Z. K., Gheni*, A., Myers, J., ElGawady, M. A., 2016.  “Ability to resist different weathering actions of eco-friendly wood fiber masonry blocks” 16th International Brick and Block Conference, Padova, Italy, June 26 – 30.
  51. Pieper***, D., Donnell, K. M., Abdelkarim*, O. I., ElGawady, M. A., 2016. “Embedded FSS sensing for structural health monitoring” International Instrumentation and Measurement Technology Conference, Institute of Electrical and Electronics Engineers IEEE, Taipei, Taiwan, May 23 – 26. 
  52. Moustafa*, A., ElGawady, M. A., 2016. “Seismic behavior of double-skin segmental bridge columns” Transportation Research Board, Washington DC, Jan. 10 – 14.
  53. Moustafa*, A., ElGawady, M. A., 2015. “Shaking table testing of a rubberized concrete column” 14th International Conference on Structural and Geotechnical Engineering, Cairo, Dec. 20 – 22.
  54. Al-Jaberi***, Z., Myers, J., and ElGawady, M. 2015. “Out-of-plane strengthening of reinforced masonry walls using near-surface mounted (NSM) FRP bars with epoxy and cementitious materials” 15th Advanced Composites in Construction (ACIC 15), University of Cambridge UK
  55. Abdelkarim*, O. I., Anumolu*, S., Gheni*, A., ElGawady, M. A., 2015. “Quick repairing of innovative precast hollow-core FRP-concrete-steel columns” The 3rd Conference on Smart Monitoring, Assessment and Rehabilitation of Structures, Antalya, Turkey, Sept. 7th – 9th.
  56. Moustafa*, A., ElGawady, M. A., 2015. “Shake table testing of a damage-resistant segmental double skin bridge column with self centering capability” The 3rd Conference on Smart Monitoring, Assessment and Rehabilitation of Structures, Antalya, Turkey, Sept. 7th – 9th.
  57. Abdelkarim*, O. I., A., ElGawady, M. A., 2015. “Innovative precast hollow-core FRP-concrete-steel bridge columns subjected to vehicle collision”. The 3rd Conference on Smart Monitoring, Assessment and Rehabilitation of Structures, Antalya, Turkey, Sept. 7th – 9th.
  58. Abdelkarim*, O. I., ElGawady, M. A., 2015. “Behavior of confined concrete using large deformable FRP under axial loading”. The 3rd Conference on Smart Monitoring, Assessment and Rehabilitation of Structures, Antalya, Turkey, Sept. 7th – 9th.
  59. Anumolu*, S., Abdelkarim*, O. I., A., ElGawady, M. A., 2015. “Finite element modeling of hollow-core steel-concrete-steel columns subjected to pure torsion”. The 3rd Conference on Smart Monitoring, Assessment and Rehabilitation of Structures, Antalya, Turkey, Sept. 7th – 9th.
  60. Tuwair**, H., Volz, J., ElGawady, M. A., Chandrashekhara, K., Birman, V., 2015. “The effects of environmental exposure on polyurethane-based GFRP bridge deck panels”. The 3rd Conference on Smart Monitoring, Assessment and Rehabilitation of Structures, Antalya, Turkey, Sept. 7th – 9th.
  61. Youssf**, O, ElGawady, M. A., Mills, J. M., 2015. “Plastic hinge length and ultimate drift of FRP-confined circular columns under seismic loading” The 3rd Conference on Smart Monitoring, Assessment and Rehabilitation of Structures, Antalya, Turkey, Sept. 7th – 9th.
  62. Youssf**, O, ElGawady, M. A., Mills, J. M., Xing, M., Benn, T., 2015. “Behaviour of crumb rubber concrete columns under seismic loading”. 27th Biennial National Conference of the Concrete Institute of Australia and the 69th RILEM Week conference, Melbourne, Australia, Aug. 30th – Sept. 2nd.
  63. Youssf**, O, ElGawady, M. A., Mills, J. M., 2015. “Behaviour of FRP-confined crumb rubber concrete columns under seismic loading” 5th International Conference on Construction Materials (ConMat): Performance, Innovations and Structural Implications, Whistler, BC, Canada, Aug. 19th – 21st.
  64. Abdelkarim*, O. I., and ElGawady, M. A., 2015. “Analysis of vehicle collision with hollow-core FRP-concrete-steel bridge columns” 5th International Conference on Construction Materials (ConMat): Performance, Innovations and Structural Implications, Whistler, BC, Canada, Aug. 19th – 21st.
  65. Abdelkarim*, O. I., Anumolu*, S., Gheni*, A., ElGawady, M. A., 2015. “Static cyclic performance of hollow-core FRP-concrete-steel columns” 5th International Conference on Construction Materials (ConMat): Performance, Innovations and Structural Implications, Whistler, BC, Canada, Aug. 19th – 21st.
  66. Tuwair**, H., Volz, J., ElGawady, M. A., Chandrashekhara, K., Birman, V., 2015. “Finite element modeling of hybrid GFRP sandwich bridge deck panels filled with polyurethane foam” 5th International Conference on Construction Materials (ConMat): Performance, Innovations and Structural Implications, Whistler, BC, Canada, Aug. 19th – 21st.
  67. Hassanli**, O, ElGawady, M. A., Mills, J. M., 2015. “Structural testing of unbonded post-tensioned masonry walls” 5th International Conference on Construction Materials (ConMat): Performance, Innovations and Structural Implications, Whistler, BC, Canada, Aug. 19th – 21st.
  68. Moustafa*, A., ElGawady, M. A., 2015. “Damping properties of high strength concrete with scrap tire rubber” 5th International Conference on Construction Materials (ConMat): Performance, Innovations and Structural Implications, Whistler, BC, Canada, Aug. 19th – 21st.
  69. Wang*, S., and ElGawady, M. A., 2015. “Effects of combined environmental exposures and axial load on CFFT columns” 5th International Conference on Construction Materials (ConMat): Performance, Innovations and Structural Implications, Whistler, BC, Canada, Aug. 19th – 21st.
  70. Abdelkarim*, O. I., and ElGawady, M. A., 2015. “Vehicle collision with reinforced concrete bridge columns” PROTECT, 5th International Workshop on Performance, Protection & Strengthening of Structures under Extreme Loading, East Lansing, Michigan, June 29th – 30th.
  71. Gheni*, A., ElGawady, M. A., Myers, J., 2015. “Cyclic in-plane behavior of unbonded post-tensioned masonry walls” 12th North American Masonry Conference, Denver, Colorado, May 17th – 20th.
  72. Hassanli**, R., ElGawady, M., Mills, J., 2015. “Plastic hinge length of unbonded post-tensioned masonry walls” 12th North American Masonry Conference, Denver, Colorado, May 17th – 20th.
  73. Hassanli**, R., ElGawady, M., Mills, J., 2015. “Structural response parameters of post-tensioned masonry walls” 12th North American Masonry Conference, Denver, Colorado, May 17-20.
  74. ElGawady, M. A., 2015. “Shear strength equations for partially grouted masonry walls” 12th North American Masonry Conference, Denver, Colorado, May 17-20.
  75. Al-Jaberi***, Z., Myers, J., ElGawady, M. A., 2015. “Influence of near-surface mounted (NSM) FRP on the out-of-plane behavior of reinforced masonry walls”, 12th North American Masonry Conference, Denver, Colorado, May 17-20.
  76. Abdelkarim*, O. I., and ElGawady, M. A., 2015. “Impact analysis of vehicle collision with reinforced concrete bridge columns” Transportation Research Board (TRB), Washington DC, Jan. 11-15.
  77. Tuwair**, H., Volz, J., ElGawady, M. A., Mohamed, M., Chandrashekhara, K., Birman, V., 2015. “Performance of GFRP bridge deck panels with corrugated web layers filled with pu foam” Transportation Research Board (TRB), Washington DC, Jan. 11-15.
  78. Abdelkarim*, O. I., and ElGawady, M. A., 2015. “Analysis of innovative hollow-core FRP- concrete-steel columns” Transportation Research Board (TRB), Washington DC, Jan. 11- 15.
  79. Ichikawa, S., Matsuzaki, H., Moustafa*, A., ElGawady, M. A., Kawashima, K., 2015. “Seismic behavior of ultra high performance segmental bridge columns” Transportation Research Board (TRB), Washington DC, Jan. 11- 15.
  80. Abdelkarim*, O. I., Gheni*, A., Anumolu*, S., ElGawady, M. A., 2015. “Seismic behavior of hollow-core FRP-concrete-steel bridge columns” ASCE Structures Congress, Portland, Oregon, April 23-25.
  81. Tuwair**, H., Volz, J., ElGwady, M., Mohamed, M., Chandrashekhara, K., Birman, V., 2014. “Testing and evaluation of GFRP sandwich bridge deck panels filled with polyurethane foam” 29th Technical Conference on Composite Materials, American Society for Composites, Sept. 8 -10, San Diego.
  82. Youssf**, O., ElGawady, M. A., Mills, J., and Ma, X., 2014. “Prediction of crumb rubber concrete strength” 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), Byron Bay, Australia, 9-12 December, S.T. Smith (Ed.).
  83. Carter*, J. D., Abdelkarim*, O. I., ElGawady, M. A., and Khayat, K. H., 2014. “FRP confinement of high strength self-consolidating concrete” 10th U.S. National Conference on Earthquake Engineering, July 21-25, Anchorage, Alaska.
  84. ElGawady, M. A., Ryu****, D., and Wijeyewickrema, A. C., 2014. “Seismic behavior of unbonded post-tensioned masonry walls” 10th U.S. National Conference on Earthquake Engineering, July 21-25, Anchorage, Alaska.
  85. Tuwair**, H., Hopkinsa***, M., Volz, J., ElGwady, M., Mohamed, M., Chandrashekhara, K., Birman, V., 2014. “An experimental study on static behavior of structural polyurethane foam infill for GFRP bridge deck panels” 1st International Conference on Mechanics of Composites, June 8 – 12, Long Island, New York.
  86. Abdelkarim*, O. I., and ElGawady, M. A., 2014. “Behavior of hybrid FRP-concrete-steel double-skin tubular columns subjected to cyclic axial compression” Structures Congress, ASCE, April 3-5, Boston, Massachusetts.
  87. ElGawady, M. A., Ryu****, D., and Wijeyewickrema, A. C., 2013. "In-plane behaviour of post-tensioned masonry walls”, 12th Canadian Masonry Symposium, June 02-05, Vancouver, Canada.
  88. ElGawady, M. A., and Dawood*, H. 2013. “Design of unbonded precast post-tensioned piers constructed using concrete filled FRP tubes” PCI Convention and National Bridge Conference, Sept. 21st – 24th, Grapevine, Texas.
  89. Youssf**, O., ElGawady, M. A., Mills, J., and Ma, X. 2013. “Experimental and finite element investigation of rubberized concrete confined by FRP” Concrete 2013 – 26th Biennial Conference of Concrete Institute of Australia, Gold Coast, Queensland, Oct. 16th – 18th.
  90. Hassanli**, R., ElGawady, M., 2013. “The accuracy of in-plane shear strength of PGM walls in different international standards”, 12th Canadian Masonry Symposium, June 2nd -5th, Vancouver, Canada.
  91. Youssf**, O., ElGawady, M. A., 2012. “An overview of sustainable concrete made with scrap rubber” 22nd Australasian Conference on the Mechanics of Structures and Materials ACMSM 22, 11-14 Dec., Sydney, NSW, Australia.
  92. Kawashima, K., Ichikawa***, S., ElGawady, M., Matsuzaki, H., Yamanobe, S., 2012. “Effect of UFC Segments for Enhancing the Seismic Performance of Bridge Columns” Proc. 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Sept. 24th – 28th.
  93. Hassanli**, R., ElGawady, M. A., 2012. “Comparisons between shear strength predictions of partially grouted masonry walls in Australian & international standards”, Australian Structural Engineering Conference, 11-13 July, Perth, WA, Australia.
  94. Syota***, I., Rui***, Z., Sasaki, T., Kawashima, K., ElGawady, M. A., Matsuzaki, H., Shinji, Y., 2011, “Seismic resistance of UFC segmented bridge piers” 66th JSCE Annual Meeting, Sept. 7th – 9th, Ehime, Japan (In Japanese).
  95. Rui**, Z., Sasaki, T., ElGawady, M. A., Kawashima, K., and Matsuzaki, H., 2011, “Seismic performance of UFC jacket piers” 66th JSCE Annual Meeting, Sept. 7th – 9th, Ehime, Japan.
  96. Ryu****, D., Wijeyewickrema, A. C. and ElGawady, M., 2011. "Finite element analysis of post-tensioned brick masonry walls", 66th JSCE Annual Meeting, Sept. 7th – 9th, Ehime, Japan.
  97. ElGawady, M. A., Nolph*, S., 2011. “In-Plane Shear Strength of Partially Grouted Masonry Shear Walls” 11th North American Masonry Conference, June 5th - 11th, Minneapolis, USA.
  98. ElGawady, M. A., and Elmapruk*, J., 2011. “Experimental shear strength of squat masonry shear walls”, 8th International Conference on Urban Earthquake Engineering, Tokyo, March 7-8.
  99. Sehhati***, R., Rodriguez-Marek, A., Cofer, W., and ElGawady, M., 2010. “Response of multi-story structures to near-fault ground motions and equivalent pulses” 9th US National and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, 25-29 July.
  100. ElGawady, M. A., Sha’lan*, A., Dawood, H., 2010. “Seismic behavior of segmented frames” 9th US National and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, 25-29 July.
  101. ElGawady, M. A., and Dawood* H., 2010. “Finite element modeling of segmented columns under lateral loading” 9th US National and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, 25-29 July.
  102. ElGawady, M. A. and Shafiei*, R., 2009. “Nonlinear static and dynamic analysis of Ravenna bridge”, 89th Transportation Research Board Annual Meeting, Washington D.C., Jan. 10-14.   
  103. ElGawady, M. A., Elmapruk* J., 2009. “In-plane shear strength of partially grouted masonry walls”, 11th Canadian Masonry Symposium, Toronto, Canada, May 31 - Jun 3.
  104. ElGawady, M. A., and Dawood* H., 2009. “Lateral displacement of rectangular reinforced concrete columns retrofitted using FRP”, 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures. Sydney, Australia, July 13-15.
  105. ElGawady, M. A., and Booker*, A. J., 2009. “Static cyclic response of concrete filled FRP tubes”, 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures. Sydney, Australia, July 13-15.
  106. ElGawady, M. A., Omervic****, B., Lestuzzi P., and Badoux, M., 2009. “In-plane static cyclic response of strengthened masonry walls with an opening and a rigid diaphragm”, International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures. Sydney, Australia, July 13-15.
  107. Greenwood***, S., ElGawady, M., Cofer, W., McLean, D., 2009. “Performance of hollow core prestressed concrete piles under lateral loading” 88th TRB Annual Meeting, Washington D. C., Jan. 11-15.
  108. Greenwood***, S., Cofer, W., ElGawady, M., McLean, D., 2008. “Finite element modeling of hollow precast prestressed reinforced concrete piles” PCI-FHWA National Bridge Conference, Orland, FL, October 5-8.
  109. Endeshaw*, M., ElGawady, M., Sack R., McLean, D., 2008. “Retrofitting OF rectangular columns using CFRP” the 5th Middle East Symposium on Structural Composites for Infrastructure Application MESC-5, Hurghada, Egypt, May 20-23.
  110. ElGawady, M., Endeshaw*, M., 2008. “Codes and provisions for retrofitting of concrete columns using FRP” the 5th Middle East Symposium on Structural Composites for Infrastructure Application MESC-5, Hurghada, Egypt, May 20-23.
  111. ElGawady, M. A., 2006. “Verifications of shear strength of masonry walls retrofitted with FRP”, 19th Biennial Conference on the Mechanics of Structures and Materials, Christchurch, New Zealand, November 29- December 1.
  112. ElGawady, M. A., Ma***, Q., Ingham, J., and Butterworth, J., 2006. “Rocking response of post-tensioned rigid blocks”, 19th Biennial Conference on the Mechanics of Structures and Materials, Christchurch, New Zealand, November 29- December 1.
  113. ElGawady, M. A., Ma***, Q., Butterworth, J. and Ingham, J., 2006. “Rocking response of solid blocks on rigid and flexible foundations” 7th International Masonry Conference, London, UK, October 30/November 1.
  114. ElGawady, M. A., Ma***, Q., Butterworth, J., and Ingham, J., 2006. “Probabilistic approach to the rigid body rocking problem”, 1st International Conference on Restoring of Heritage Masonry Structures, Cairo, Egypt, April 24-27.
  115. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2006. “Retrofitting of masonry walls using shotcrete”, New Zealand Society of Earthquake Engineering Annual Conference, Napier, New Zealand, March 10-12.
  116. ElGawady, M. A., Ma***, Q., Ingham, J., and Butterworth, J., 2006. “Probabilistic analysis of rocking blocks”, New Zealand Society of Earthquake Engineering Annual Conference, Napier, New Zealand, March 10-12.
  117. ElGawady, M. A., Ma***, Q., Ingham, J., and Butterworth J., 2006. “The effect of interface material on the dynamic behavior of free rocking blocks”, 8th U.S. National Conference of Earthquake Engineering, San Francisco, California, USA, April 18-22.
  118. ElGawady, M. A., Ma***, Q., Ingham, J., Butterworth, J., 2005. “Experimental investigation of rigid body rocking”, The New Zealand Concrete Industry Conference, Auckland, New Zealand, Sept. 22nd – 24th.
  119. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2005. “Experimental investigation of retrofitted URM walls”, 10th Canadian Masonry Symposium, Banff, Canada, June 8-12.
  120. ElGawady, M. A., 2005. “Influence of material properties on shear strength of URM walls retrofitted with FRP”, 10th Canadian Masonry Symposium, Banff, Canada, June 8-12.
  121. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2005. “Static cyclic tests on URM walls after retrofitting with hardwires and GFRP”, 5th International Conference on Earthquake Resistant Engineering Structures, Skiathos, Greece, 30 May -1 June.
  122. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2005. “Static cyclic in-plane tests of upgraded URM walls”, 4th Middle East Symposium on Structural Composites for Infrastructure Applications, Alexandria, Egypt, May 20-23.
  123. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2005. “Seismic performance of URM walls retrofitted using FRP”, New Zealand Society of Earthquake Engineering Annual Conference, Wairakei, New Zealand, March 11-13.
  124. ElGawady, M. A., 2005. “Shear model for URM walls retrofitted with FRP”, New Zealand Society of Earthquake Engineering Annual Conference, Wairakei, New Zealand, March 11-13.
  125. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2004. “Retrofitting of URM wall using post-tensioning and GFRP”, Mechanics of Masonry Structures Strengthened with FRP-Materials: Modeling, Testing, Design, Control, Venice, Italy, Dec. 6th – 8th.
  126. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2004. “A review of retrofitting of unreinforced masonry walls using composites”, 4th International Conference on Advanced Composite Material in Bridges and Structures (ACMBS), Calgary, Canada, July 20-23.
  127. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2004. “A review of conventional seismic retrofitting techniques for URM”, 13th Brick/Block Masonry Conference, Amsterdam, Holland, July 4th -7th.
  128. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2004. “Static cyclic tests on URM walls before and after retrofitting with composites”, 13th Brick/Block Masonry Conference, Amsterdam, Holland, July 4-7.
  129. ElGawady, M. A., Hegner J., Lestuzzi, P., and Badoux, M., 2004. “Dynamic versus static cyclic tests of masonry walls before and after retrofitting with GFRP”, 13th World Conference on Earthquake Engineering, Vancouver, Canada, August 1 – 6.
  130. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2003. “Rehabilitation of unreinforced brick masonry walls using composites”, Retrofitting of Masonry Structures and Earthquake Resistant Design, Short Course, Dresden, Germany, December 7-18 (Invited).
  131. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2003. “In-plane lateral behavior of URM walls upgraded with composites”, Response of Structures to Extreme Loadings XL2003, Toronto, Canada, August 3-6.
  132. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2003. “Dynamic in-plane tests on URM”, Response of Structures to Extreme Loadings XL2003, Toronto, Canada, Aug. 3rd -6th.
  133. Badoux, M., ElGawady, M. A., and Lestuzzi, P., 2002. “Earthquake simulator tests on unreinforced masonry walls before and after upgrading with composites”, The 12th European Conference on Earthquake Engineering, London, UK, Paper reference 862, Sept. 9th -13th.
  134. ElGawady, M. A., Rabie, M., and Talat M., 2002. ” Strengthening of corbels using CFRP an experimental program”, 3rd International Conference for Composite in Infrastructure ICCI’02, San Francisco, USA, Paper No. 013.
  135. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2002 “Dynamic in-plane behavior of URM walls upgraded with composites”, 3rd International Conference for Composite in Infrastructure ICCI’02, San Francisco, USA, Paper No. 009.
  136. ElGawady, M. A., Lestuzzi, P., and Badoux, M., 2001. “Seismic upgrading of URM walls using composite fiber laminates”, 20th EAEE Seminar, Sion, Switzerland, Sept. 1st - 7th.

Book chapters

  1. Moustafa*, A., ElGawady, M. A., 2016. “Damage-resistant segmental double-skin bridge column with replaceable energy dissipaters” in Insights and Innovations in Structural Engineering, Mechanics and Computation, Ed. Alphose Zingoni, Taylor & Francis Group, Pages 370–375, Print ISBN: 978-1-138-02927-9.
  2. Gheni*, A., ElGawady, M. A., Myers, J., 2016.  “Energy efficient masonry units using sustainable techniques” in Insights and Innovations in Structural Engineering, Mechanics and Computation, Ed. Alphose Zingoni, Taylor & Francis Group, Pages 1702 - 1707, Print ISBN: 978-1-138-02927-9.
  3. Al-Jaberi***, Z., Myers, J., and ElGawady, M. 2016. “A comparative study of flexural behavior of reinforced masonry walls strengthened with near-surface mounted FRP bars or externally bonded FRP sheets” in Insights and Innovations in Structural Engineering, Mechanics and Computation, Ed. Alphose Zingoni, Taylor & Francis Group, Pages 1459 - 1464, Print ISBN: 978-1-138-02927-9.
  4. Barnett§ R., ElGawady§, and Peterson§, R. 2015. “TMS Shopping Center” (Chapter 16), Masonry Designers’ Guide 2013, The Masonry Society
  5. Barnett§ R., ElGawady§, M., Harris§, B., Klingner§, R., and Peterson§, R. 2012. “TMS Shopping Center” (Chapter 16), Masonry Designers’ Guide, The Masonry Society, 7th Edition
  6. Barnett§ R., ElGawady§, M., Harris§, B., Klingner§, R., and Peterson§, R. 2010. “TMS Shopping Center” (Chapter 16), Masonry designers’ guide, The Masonry Society, 6th Edition
  7. ElGawady, M. A., and Endeshaw*, M. 2008. “FRP retrofit of rectangular RC columns”, (Chapter 4), Research Progress in Materials Science, Olsson, W. and Lindberg, F. (Ed.), Nova Science Publishers.

§ Alphabetic order of the authors

Technical Reports

  1. Pourhassan*, A., Gheni*, A., ElGawady, M. A., 2019. “Rubberized chip seal implementation in Mid-Missouri” Final report, Region H – Missouri Department of Natural Resources.
  2. ElGawady, M. A., Abdulazeez*, M., Ramadan*, A., Sherstha*, B., Gheni*, A., Gomaa*, E., Darwish*, Y, 2019. “Behavior and Repair of Corroded Steel H-Piles Phase I (Axial Behavior)”, Mid-America Transportation Center, Final Report 25-1121-0005-133-1.
  3. Islam*, M., Kashosi*, C., Gomaa*, E., Gheni*, A., ElGawady, M. A., 2019. “Performance of 100% fly ash concrete for infrastructure repair” Missouri Department of Natural Resources, July.
  4. Gheni*, A., Pourhassan*, A., ElGawady, M. A., Darwish*, Y, Schonberg, W, 2018. “Field implementation of rubberized chip seal” Missouri Department of Transportation, Report No. CMR 18-012, December.
  5. Gomaa*, E., Sargon*, S, Kashosi*, C., Gheni*, A., ElGawady, M. A., Schonberg, W, 2018. “Characterization and performance of zero-cement concrete” Missouri Department of Transportation, Report No. CMR 18-011, December.
  6. Gheni*, A., Abdelkarim*, O. I., Liu, X. ***, Abdulazeez*, M., Lusher, M., Liu, K.***, ElGawady, M. A., Shi, H., Wang, J., 2017. “Mechanical and Environmental Performance of Eco-Friendly Chip Seal with Recycled Crumb Rubber”, Missouri Department of Natural Resources, February.
  7. ElGawady, M. A., Abdelkarim*, O. I., Anumolu*, S., Gheni*, A., 2015. ”Precast Columns for Accelerating Bridge Construction” Mid-America Transportation Center, Research Report No. 25-1121-0003-297, May.
  8. Abdelkarim*, O. I., Anumolu*, S., Gheni*, A., Wang*, S., ElGawady, M. A., 2015. “Hollow-core FRP-concrete-steel bridge columns under extreme loading” Missouri Department of Transportation, Report No. CMR 15-008, April.
  9. ElGawady, M., 2014. “Acquisition of uniaxial shaking table for dynamic testing of structural elements” Department of Transportation, Report No. RE 368, August.
  10. ElGawady, M., and Gheni, A., 2014. “Strength of Unbonded Post-Tensioned Walls” Department of Transportation, Report No. R 349, August.
  11. ElGawady, M., 2014. “Mechanical Characteristics of Low-cost Hybrid Fiber Reinforced Polymer” Department of Transportation, Report No. R 343, July.
  12. Wang, S., ElGawady, M. A., Shrestha, P. P., Said, A., Dhakal, D., 2015 “Environmental, mechanical, and life-cycle cost analysis of bridge columns” Department of Transportation, Report No. R 337, August.
  13. ElGawady, M. A., 2014. “Dilation characteristics of rubberized concrete” Department of Transportation, Report No. R 342, August.
  14. ElGawady, M. A., and Abdelkarim, O., 2014. “Behavior of hollow-Core FRP-concrete-steel columns subjected to cyclic axial compression” Department of Transportation, Report No. R 357, August.
  15. Kuper, A., ElGawady, M., 2009. “Detection of delaminations of FRP retrofitted reinforced concrete columns” Report No. TNW2009-08, TransNow.
  16. Cofer, W., ElGawady, M., Greenwood, S., 2009. “Seismic assessment of WSDOT bridges with prestressed hollow core piles, part I” Washington State Department of Transportation, Report No. WA-RD 732.1.
  17. ElGawady, M., Cofer, W., Shafiei-Tehrany, R., 2009. “Seismic assessment of WSDOT bridges with prestressed hollow core piles, part II” Washington State Department of Transportation, Report No. WA-RD 732.1.
  18. Endeshaw, M., ElGawady, M., Sack, R., and McLean, D., 2007. “Retrofit of rectangular bridge columns using CFRP wrapping” FHWA Technical report, Contract DTFH61-03-C-00104.
  19. ElGawady, M., Lestuzzi, P., and Badoux, M., 2003. “Dynamic tests of URM walls before and after upgrading with composites” Report No. 1, Applied Computing and Mechanics Laboratory, Ecole Polytechnique Federal du Lausanne (EPFL), Switzerland

Presentations and Seminars

Invited presentations and presentations without paper

  1. “Mechanical and Environmental behavior of FRP-concrete-steel columns used to accelerate bridge construction” Plenary Speaker, 1st International Congress on Urban and Civil Engineering, Prague, Czech Republic October 22-23, 2018.
  2. “Rapid Repair of Hollow-Core FRP-Concrete-Steel Columns” ACI Spring Convention, Salt Lake, March 25 - 29, 2018.
  3. “Shaking Table Testing of Self-Centering Hollow- Core FRP-Concrete-Steel Bridges Columns Subjected to Near-Fault Ground Motion” ACI Spring Convention, Salt Lake, March 25 - 29, 2018.
  4. “Strength Degradation of CFFT Cylinders Subjected to Accelerated Seawater Corrosion and Sustained Axial Load” ACI Spring Convention, Salt Lake, March 25 - 29, 2018.
  5. “Experimental Evaluation of the Seismic Performance of Hollow-Core Composite Bridge Columns Subject to Cyclic Loading” ACI Spring Convention, Salt Lake, March 25 - 29, 2018.
  6. “Evaluation of FRP and FRCM composites for the strengthening of reinforced masonry walls” ACI Fall Convention, Anaheim, Oct. 15 – 19, 2017.
  7. “Column-footing connection evaluation of hollow- core composite bridge columns” ACI Fall Convention, Anaheim, Oct. 15 – 19, 2017.
  8. “Effects of column footing connections of hollow-core composite bridge columns” ACI Spring Convention, Detroit, March 26 – 30, 2017.
  9. “Experimental study on flexural behavior of reinforced masonry walls strengthened with FRCM composite or NSM with cementitious adhesive” ACI Fall Convention, Philadelphia, Oct. 23 – 27, 2016.
  10. “Confinement of masonry using an innovative steel ring” Seismic Committee of TMS, annual meeting, 2017
  11. “New structural systems for sustainable and accelerated construction” Keynote Lecture, 7th Jordanian Civil Engineering Conference, May 9 – 11, 2017 
  12. “Innovative column design for extreme loads” Transportation Engineers Association of Missouri, St Louis, Mo, March 9 – 11, 2016
  13. “Improving the seismic performance of bridge columns using more sustainable material” the Seismic Design and Performance of Bridges Committee AFF50, TRB, Washington DC, Jan. 8 – 12, 2016
  14. “Seismic behavior of precast hollow-core columns for accelerated bridge construction”. National Accelerated Bridge Construction Conference, December 7-8, 2015.
  15. “Segmental hollow-core columns for accelerating bridge construction” Toward resilient and sustainable infrastructure development at the new Suez Canal region in Egypt, US-Egypt workshop, December 7 -9, 2015
  16. “Seismic behavior of FRP-concrete-steel columns” The Earthquake-Resistant Concrete Bridges Committee 341, ACI Fall Convention, Denver, November 7 – 11, 2015.
  17. “Static cyclic and dynamic behavior of hollow-core bridge columns”, ACI Fall Convention, Denver, November 7 – 11, 2015.
  18. “Mechanical characterization of concrete masonry units manufactured using crumb rubber aggregate” The Masonry Society Annual Meeting, Indianapolis, Indiana, October 15 -20, 2015.
  19. “Testing and Evaluation of GFRP Sandwich Bridge Deck Panels with Polyurethane Foam Core” American Society of Mechanical Engineering, International Mechanical Engineering Congress and Exposition, Houston, Texas, November 13 – 19, 2015
  20. “Thermal characterization of concrete masonry units manufactured using recycled tires as an aggregate” NSF/DOE workshop, Oak Ridge, Tennessee, June 3, 2015
  21. “Behavior of FRP-Concrete-Steel Double-Skin Tubular Columns under Lateral Loads” Mohamed A. ElGawady, and Omar I. Abdelkarim, American Concrete Institute Spring Convention, Kansas City, Missouri, April 12 – 16, 2015
  22. “Seismic behavior of innovative bridge columns for ABC construction” the Seismic Design and Performance of Bridges Committee AFF50, TRB, Washington DC, Jan. 11 – 15, 2015
  23.  “Behavior of innovative hollow-core FRP-concrete-steel columns” ACI Committee 341, Washington DC, 2014.
  24. “Hollow-core columns for ABC” Washington State DOT, Olympia, WA, April 24, 2014.
  25. “Proposed shear strength design equations for partially grouted masonry walls” The Flexural, Axial, and Shear Committee, The Masonry Society Annual Meeting, October 10 -14, Scottsdale, Arizona, 2014.
  26. “Experimental investigation of unbonded post-tensioned masonry walls” The Prestressed Committee, The Masonry Society Annual Meeting, October 10 -14, Scottsdale, Arizona, 2014.
  27.  “Behavior of hollow-core FRP-concrete-steel columns under extreme loading”, Transportation Infrastructure Conference, October 3, Rolla, MO, 2014.
  28.  “Shear strength of partially grouted masonry walls” The Flexural, Axial, and Shear Committee, The Masonry Society Spring Meeting, April 22- 26, Kansas City, Kansas, 2014.
  29.  “Seismic design parameters for unbonded post-tensioned masonry walls” The Prestressed Committee, The Masonry Society Spring Meeting, April 22- 26, Kansas City, Kansas, 2014.
  30.  “Disaster-resilient bridges using concrete filled FRP tubes” Centre for Infrastructure Engineering Studies Seminar Series, Rolla, MO, 2013.
  31. “Strength reduction factor of post-tensioned masonry shear walls” The Prestressed Committee, The Masonry Society Annual Meeting, October 12, Herndon, Virginia, 2013.
  32. “In-plane seismic response of partially grouted masonry shear walls” The Masonry Society Annual Meeting, October 12, Herndon, Virginia, 2013.
  33. “Behavior of sustainable concrete made with scrap rubber” International Concrete Sustainability Conference, May 7-8, San Francisco, 2013.  
  34. “Self-centering infrastructure” German University in Cairo, Egypt, 2013.
  35. “Seismic performance of precast post-tensioned bridge piers and bents” Committee 341, ACI Spring Convention, Chicago, 2010.
  36. “Accelerated bridge construction system” Committee AFF 50, Transportation Research Board (TRB), 2010.
  37. “Seismic behaviour of post-tensioned bridge piers”, New Orleans, ACI Fall Convention, Special Session (How Do You Spice Up a Concrete Bridge to Be Earthquake Resistant), New Orleans, 2009.
  38. “Strengthening of low cost housing” 10th NAMC, St Louis, Missouri, 2007.
  39. “Rehabilitation of unreinforced brick masonry walls using composites”, Retrofitting of Masonry Structures and Earthquake Resistant Design, Short Course, Dresden, Germany, 2003.

Seminars

  1. “Hollow core precast columns for accelerating bridge construction” Missouri Society of Professional Engineers, Jefferson City Chapter lunch, Jefferson City, Missouri, May 26th, 2015
  2. “Behavior of hollow core FRP-concrete-steel columns under extreme loads” St Louis University, St Louis, Missouri, Nov. 25, 2014.
  3. “Unbonded post-tension masonry shear walls” Architectural Engineering Institute Student Chapter, Missouri University of Science and Technology, 2013

Media Exposure and Visibility

  • “Less could mean more for stronger building materials” ASCE Civil Engineering Magazine, May Issue, 2015.
  • “Ready to fill in” Roads & Bridges Magazine, November, 2015.
  •  “Scrap tires finding a new home” News Tribune, Jefferson City, MO, Sunday March 9, 2014.
  • “Pettis County Commission tests new road material”, Sedalia Democrat, October 21, 2016.

EDUCATION

  • Ph.D. Structural Engineering, Swiss Federal Institute of Technology Lausanne (EPFL), Switzerland, 2004.
  • M.Sc. Structural Engineering, Cairo University, Egypt, 2000.
  • B.Sc. (magna cum laude) Civil Engineering, Cairo University, Egypt, 1997.

RESEARCH INTEREST

Behavior of masonry and concrete structures, steel design, sustainable construction materials, seismic behavior of concrete bridges, self-centering of masonry and concrete elements, concrete filled fiber reinforced polymer tubes, retrofitting of unreinforced masonry and concrete structures.

HONORS AND AWARDS

·   3rd most cited paper in the American Society of Civil Engineers (ASCE) Journal of Bridge Engineering “Seismic Behavior of Self-Centering Precast Segmental Bridge Bents”

https://ascelibrary.org/doi/abs/10.1061/%28ASCE%29BE.1943-5592.0000174

·   One of the top-20 most-cited papers since 2016 in Engineering Structures Journal “Static cyclic behavior of FRP-confined crumb rubber concrete columns”

https://www.journals.elsevier.com/engineering-structures/most-cited-articles

·   American Society of Civil Engineers (ASCE) Innovation Award (with my PhD student Yasser Darwish), 2019

·   Missouri S&T Faculty Research Award, 2018 

·   Missouri S&T Faculty Excellence Award, 2017 

·   Joseph H. Senne, Jr. Academy of Civil Engineers Faculty Achievement Award, 2016

·   Inaugural Benavides Faculty Scholar (Limited Endowed Chair), 9/2015 – present

·   Elected member, Board of Directors, The Masonry Society, 2013 - present

·   Outstanding Reviewer, Journal of Structural Engineering, ASCE, 2013

·   ExCEEd New Faculty Excellence in Teaching Award, ASCE, Northern Arizona University, July 15 – 20, 2007

·   The University of Auckland Postdoctoral Research Fellowship, 1/2005 – 8/2006.

·   Fellowship, German Academic Exchange Service, Dresden University of Technology 12/7/2003 – 12/18/2003.

·   Postgraduate Scholarship, Federal Commission for Scholarships (FCS), Switzerland, 7/2000 – 3/2003.

·   Egyptian Government Award of Excellence in Undergraduate Studies in the Faculty of Engineering, 10/1/1992 – 7/1/1993 and 10/1/1994 – 7/1/1997.

My Advisee Honors, AWARDS, AND SCHOLARSHIPS

·   Binod Shrestha, Mohanad Abdulazeez, and Ahmed Gheni (as a team), 1st poster prize (three awards each year; two of them went to my students during this year), Oklahoma Transportation Research Day Conference, Midwest City, 2019

·   Amro Ramadan, 2nd poster prize (three awards each year; two of them went to my students during this year), Oklahoma Transportation Research Day Conference, Midwest City, 2019

·   Mohanad Abdulazeez, 1st poster prize, Missouri Bridge Conference, University of Missouri, (three awards each year; all of them went to my students during this year), 2019

·   Eslam Gomaa, 2nd poster prize, Missouri Bridge Conference, University of Missouri, (three awards each year), 2019

·   Alireza Pourhassan, 3rd poster prize, Missouri Bridge Conference, University of Missouri, (three awards each year), 2019

·   Eslam Gomaa, 1st poster prize, 6th CIES Annual Transportation Conference, Rolla, Mo. (three awards each year, two of them went to my students during this year), 2018

·   Amro Ramadan, 3rd poster prize, 6th CIES Annual Transportation Conference, Rolla, Mo. (three awards each year), 2018

·   Amro Ramadan, 1st prize, Missouri S&T Civil Engineers Academy Graduate Students Excellence Award, Missouri S&T, (three awards each year; all of them went to my students during this year), 2018

·   Eslam Gomaa, 2nd prize, Missouri S&T Civil Engineers Academy Graduate Students Excellence Award, Missouri S&T, 2018

·   Yasser Darwish, 3rd prize, Missouri S&T Civil Engineers Academy Graduate Students Excellence Award, Missouri S&T, 2018

·   Mohanad Abdulazeez, Franklin Y. and Pi-Yu C Cheng Teaching Scholars Program, 2018 - Present

·   Mohanad Abdulazeez, College of Engineering and Computing Dean’s Scholar, Missouri S&T, 2018

·   Mohanad Abdulazeez, ACI Missouri Chapter Honorary Graduate Scholarship, 2018

·   Alexis Lee, ACI Missouri Chapter, ACI Luke and Billie Snell Undergraduate Scholarship, 2018

·   Alexis Lee, 1st prize, Civil Engineering Academy Undergraduate Students Excellence Award, Missouri S&T, 2018

·   Eslam Gomaa, April Best Presentation, Chi Epsilon Society, 2018

·   Yasser Darwish, Chi Epsilon Society Graduate Scholarship, 2018

·   Mohanad Abdulazeez, Best Poster, Missouri S&T Graduate Research Showcase (six awards each year), 2018 

·   Eslam Gomaa, 1st prize, Missouri S&T Civil Engineers Academy Graduate Students Excellence Award, Missouri S&T, (three awards each year; all of them went to my students during this year), 2018

·   Amro Ramadan, 2nd prize (tie), Missouri S&T Civil Engineers Academy Graduate Students Excellence Award, Missouri S&T, 2018

·   Yasser Darwish, 2nd prize (tie), Missouri S&T Civil Engineers Academy Graduate Students Excellence Award, Missouri S&T, 2018

·   Eslam Gomaa, 1st prize, Missouri S&T Graduate Research Showcase (six awards each year, two of them went to my students during this year), 2018 

·   Ahmed Gheni, 2nd prize, Missouri S&T Graduate Research Showcase (six awards each year), 2018 

·   Eslam Gomaa, 2nd poster prize, 5th CIES Annual Transportation Conference, Rolla, Mo. (three awards each year), 2017 

·   Ahmed Gheni, 3rd prize, Oklahoma Transportation Research Day, 2017

·   Ahmed Gheni, Wire Reinforcement Institute Education Foundation Scholarship, $2,750, 2017

·   Ahmed Gheni, Inaugural College of Engineering and Computing Dean’s Scholar, Missouri S&T 2017

·   Ahmed Gheni, ACI Missouri Chapter Honorary Graduate Scholarship, 2017

·   Ahmed Gheni, Civil Engineering Academy Graduate Students Excellence Award, Missouri S&T, 2017

·   Ahmed Gheni, 1st prize, Missouri S&T Graduate Research Showcase (six awards each year; (two of them went to my students during this year), 2017 

·   Mohanad M. Abdulazeez, 2nd prize, Missouri S&T Graduate Research Showcase (six awards each year), 2017

·   Mohanad Abdulazeez, 1st prize, Academy Poster Contest, Civil, Architectural, and Environmental Engineering Department, Missouri S&T (three awards each year; two of them went to my students during this year), 2017

·   Ahmed Gheni, 3rd prize, Academy Poster Contest, Civil, Architectural, and Environmental Engineering Department, Missouri S&T (three awards each year), 2017

·   Ahmed Gheni, 1st prize, Missouri S&T Graduate Research Showcase (six awards each year), 2016 

·   Ahmed Gheni, 1st poster prize, 4th CIES Annual Transportation Conference, Rolla, Mo. (three awards each year), 2016 

·   Mohanad Abdulazeez, 3rd poster prize, 4th CIES Annual Transportation Conference, Rolla, Mo. (three awards each year), 2016 

·   Ahmed Gheni, National Chi Epsilon Graduate Fellowship, 2016

·   Ahmed Gheni, St. Louis Chapter of the American Society of Professional Estimators Scholarship, 2016

·   Ahmed Gheni, Central Chi Epsilon Graduate Fellowship, 2015

·   Noor Yacob, 1st prize, Academy Poster Contest, Civil, Architectural, and Environmental Engineering Department, Missouri S&T (three awards each year), 2016

·   Ayman Moustafa, 1st poster prize, 3rd CIES Annual Transportation Conference, St Louis University (three awards each year), 2015 

·   Song Wang, 3rd prize, Academy Poster Contest, Civil, Architectural, and Environmental Engineering Department, Missouri S&T (three awards each year), 2015

·   Omer Abdelkarim, 1st prize, Academy Poster Contest, Civil, Architectural, and Environmental Engineering Department, Missouri S&T (three awards each year), 2015

·   Ahmed Gheni, Travel Grant to attend the 12th North American Masonry Conference, National Concrete Masonry Association, $1000, 2015

·   Hesham Tuwair, 1st prize, 1st Annual Missouri Bridge Conference (two awards each year), 2015

·   Hesham Tuwair, 1st prize, Missouri S&T Graduate Research Showcase (six awards each year), 2015 

·   Ahmed Gheni, 3rd prize, Missouri S&T Graduate Research Showcase (six awards each year), 2015 

·   Hesham Tuwair, 2nd prize, Academy Poster Contest, Civil, Architectural, and Environmental Engineering Department, Missouri S&T (three awards each year), 2014

·   Omer Abdelkarim, Travel Grant to attend the 10th U.S. National Conference on Earthquake Engineering, Graduate Research Office, Missouri S&T, $200, 2014

·   Omer Abdelkarim, Travel Grant to attend the 10th U.S. National Conference on Earthquake Engineering, Earthquake Engineering Research Institute (EERI), $400, 2014

·   Matthew Hoffman, The Pam Keating Memorial Scholarship (AS$10,000, the most prestigious award in University of South Australia) for his graduation thesis on rubberized concrete, 2012

EDITORSHIP

Leadership and Membership of Technical Committees

  • Chair, ACI/ASCE Committee 441, Reinforced Concrete Columns, 2016 - present
  • Chair, ACI Committee 341A, Earthquake-Resistant Concrete Columns, 2015- Present 
  • Chair, Award Committee, The Masonry Society, 2019- present
  • Co-Chair / Member, Research Committee, The Masonry Society, 2017- present / 2008 - 2017
  • Secretary/Member, Prestressed Committee, TMS 402/602 (MSJC) Building Code, 2010- Present
  • Voting Member, Main Committee, TMS 402/602 (Formerly MSJC; Masonry Construction Building Code), 2016 - Present
  • Member, ACI Committee 341 (Earthquake-Resistant Concrete Bridges), 2015- Present 
  • Associate Member, ACI Committee 440 (Fiber-Reinforced Polymer Reinforcement)
  • Member, TRB Committee AFF50, Seismic Design and Performance of Bridges
  • Associate Member, TRB Committee AFF80, Structural FRP
  • Christchurch earthquake (2011) mission of reconnaissance sponsored by the Japan Society of Civil Engineering (JSCE)
  • Member/Associate Member, Shear Committee, TMS 402/602 (MSJC) Building Code, 2008-2016
  • Member/Associate Member, Seismic Committee, TMS 402/602 (MSJC) Building Code, 2010- Present

Editorship and Peer-review of Technical Manuscripts

  • Associate Editor, Journal of Bridge Engineering, ASCE, 6/2016 – present
  • Editorial Board Member, Advances in Civil Engineering, 2018 - present
  • Coauthor, Masonry Design Guide Manual, 6th, 7th, 8th, and 2013 editions
  • Guest Editor, Sustainable Concrete Structures, Sustainability Journal, 2018
  • Guest Editor, Resilient Civil Infrastructure under Dynamic Loadings, Shock and Vibration Journal, 2017
  • Technical paper reviewer: Earthquake Engineering J., Earthquake Engineering and Structural Dynamics J., J. Engineering Structures, J. Advances in Structural Engineering, Composite Structures, Arabian J. Science and Engineering, J. Cleaner Production, Composites Part B: Engineering, ASCE Composites for Construction, ASCE J. of Bridge Engineering, ASCE J. Structural Engineering, ACI Material J., ACI Structural J., Construction and Building Materials, J. Material Engineering (ASCE), J. Performance of Constructed Facilities (ASCE)
  • Evaluator, Nevada Medal for Distinguished Graduate Student Paper in Bridge Engineering, 2010, and 2017
  • Evaluator for best thesis award, The Masonry Society (TMS), 2007-present
  • Reviewer for the Council of University Transportation Centers (CUTC) National Student Award, 2013/2014

Organizing, Scientific, and Steering Committees of Technical Conferences

  • Member of the Organizing Committee, International Conference and Expo on Urban and Civil Engineering, Montreal, Canada, June 15-16, 2020
  • Member of the Organizing Committee, International Conference and Exhibition on Building Materials and Construction Technologies (BMCT), Dubai, UAE, April 20 - 22, 2020
  • Member of the Scientific Committee, Innovation for Sustainable Infrastructure, Ha Noi, Vietnam, Oct. 31 – Nov. 1, 2019
  • Member of the Scientific Committee, International Conference on Material Engineering and Materials Science (MEMS2019), Wuhan, Hubei, China, Dec. 13th-14th, 2019
  • Member of the Organizing Committee, 3rd Annual Conference on Steel and Structural Engineering, Dubai, UAE, Jan. 28-29, 2019
  • Member of the Steering Committee, Congress on Architecture and Civil Engineering, UAE, January 4-6, 2019
  • Member of the Organizing Committee, 1st International Conference on Civil Engineering Technologies, Jordan, September 2 – 6, 2018
  • Member of the Organizing Committee, 5th International Conference on Steel and Concrete Structures, Japan, August 29 -30, 2018
  • Member of the Scientific Committee, 4th International Conference on Civil Engineering Education (EUCEET 2018), Spain, September 5 – 8, 2018
  • Member, Technical Committee, 13th North American Masonry Conference, Salt Lake, 2018
  • Member, Technical Committee, 12th North American Masonry Conference, Denver, 2015
  • Member, Technical Committee, 11th North American Masonry Conference, Minneapolis, 2011
  • Member, Technical Committee, 11th Canadian Masonry Symposium, Ontario, Canada, 2009
  • Member, International Scientific Advisory Committee, 5th Conference on Earthquake Resistant Engineering Structures, Bologna, Italy, 2007
  • Member, International Scientific Advisory Committee, 10th International Conference Structural Repairs and Maintenance of Heritage Architecture, Prague, Czech Republic, 2007

Session Organizer and Moderator During Technical Conferences

  • Session organizer and chair, 11th National Earthquake Engineering Conference, 2018
  • Session moderator, 16th International Congress on Polymers in Concrete (ICPIC 2018), 2018
  • Session moderator, 9th International Conference on Bridge Maintenance, Safety, and Management, Melbourne, Australia, July 9th – 13th, 2018
  • Session organizer and chair, Seismic Performance of Innovative Bridge Columns for Accelerating Bridge Construction, the 16th World Conference on Earthquake Engineering, Chile, January 9 – 13, 2017
  • Session organizer and chair, Seismic Behavior of Masonry Shear Walls, the 16th World Conference on Earthquake Engineering, Chile, January 9 – 13, 2017
  • Session Chair, 5th International Conference on Construction Materials (ConMat): Performance, Innovations and Structural Implications, Whistler, BC, Canada, August 19 – 21, 2015
  • Session organizer and chair, Seismic Design of Segmental and Innovative Bridges, ACI Fall Convention, Denver, November 7 – 11, 2015.
  • Session Chair, the 3rd Conference on Smart Monitoring, Assessment and Rehabilitation of Structures, Antalya, Turkey, September 7-9, 2015.
  • Session Chair, 9th US National and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, 2010.
  • Session Organizer and Chair, 5th Conference on Earthquake Resistant Engineering Structures, Bologna, Italy, 2007