BROCHURE
Mohamed El Amine Slimani is a Associate Professor,University of Science and Technology Houari Boumediene,Algeria

Mohamed El Amine Slimani

Associate Professor

Organizing Committee Member

Algeria

University of Science and Technology Houari Boumediene

BIOGRAPHY

Dr. Mohamed El-Amine Slimani has achieved his PhD degree in July 2017 at the USTHB on combined solar PV/Thermal systems. Currently, he works as an assistant professor at the Department of Energetic and Fluid Mechanics, University of Science and Technology ‘Houari Boumediene’ (USTHB), and associate researcher at the UDES unite of the renewable energy development center "CDER". Likewise, He is an active Editorial Board Member/Reviewer contributed in several energy-themed journals; Awarded several times as an outstanding reviewer. Has contributed and published several articles in the research fields of Physics and Mechanical Engineering; for themes of renewable energy sources; energy conversion and conservation; thermodynamics, Fluid Mechanics; and heat & mass transfer phenomena.  

PUBLICATIONS

 

  • F Mnasri, S Bahria, MEA Slimani, O Lahoucine, M El Ganaoui. Building incorporated bio-based materials: Experimental and numerical study. Journal of Building Engineering (2020), 101088.  http://dx.doi.org/10.1016/j.jobe.2019.10108
  • B. Boumaaraf, H. Boumaarab, M. E.-A. Slimani, S. Tchoketch_Kebira, M. S. Ait-cheikha, K. Touafek. Performance evaluation of a locally modified PV module to a PV/T solar collector under climatic conditions of semi-arid region. Mathematics and Computers in Simulation (2020),  V. 167, PP. 135-154. https://doi.org/10.1016/j.matcom.2019.09.013
  • B. Boumaaraf, K. Touafek, M. S. Ait-cheikh,  M.E.-A. Slimani. Comparison of electrical and thermal performance evaluation of a classical PV generator and a water glazed hybrid photovoltaic thermal collector. Mathematics and Computers in Simulation (2020),  V. 167,  PP. 176-193, https://doi.org/10.1016/j.matcom.2018.09.003,       
  • I. Nadji Maachi, A. Mokhtari, M.E.-A. Slimani. The natural lighting for energy saving and visual comfort in collective housing: A case study in the Algerian building context. Journal of Building Engineering (2019), V. 24, 100760, https://doi.org/10.1016/j.jobe.2019.100760 
  • M. A MEDEBBER, A. AISSA,  M.E.-A. SLIMANI, N. Retiel. Numerical Study of Natural Convection in Vertical Cylindrical Annular Enclosure Filled with Cu-Water Nanofluid under Magnetic Fields. Defect and Diffusion Forum (2019), V. 392, PP. 123-137. https://doi.org/10.4028/www.scientific.net/DDF.392.123 
  • R. Sellami , M. Amirat, A. Mahrane,  M.E.-A. Slimani, A. Arbane, R. Chekrouni.  Experimental and numerical study of a PV/Thermal collector equipped with a PV-assisted air circulation system: Configuration suitable for building integration. Energy and Buildings (2019), V. 190, PP. 216234, https://doi.org/10.1016/j.enbuild.2019.03.007 
  • A. Hmida, N. Chekir, A. Laafer,  M.E.-A. Slimani, A. Ben Brahim. Modeling of cold room driven by an absorption refrigerator in the south of Tunisia: A detailed energy and thermodynamic analysis. Journal of Cleaner Production (2019), V 211, PP. 1239-1249, https://doi.org/10.1016/j.jclepro.2018.11.219  
  • W. Braham Chaouch, A. Khellaf , A. Mediani,  M.E.-A. Slimani, A. Loumani, A.Hamida. Experimental investigation of an active direct and indirect solar dryer with sensible heat storage for camel meat drying in Saharan environment. Solar Energy (2018), V. 174; PP. 328-342, https://doi.org/10.1016/j.solener.2018.09.037  
  • M.E.-A. Slimani, M. Amirat, I. Kurucz, S. Bahria, A. Hamidat, W. Braham Chaouch. A detailed thermalelectrical model of three photovoltaic/thermal (PV/T) hybrid air collectors and photovoltaic (PV) module: Comparative study under Algiers climatic conditions. Energy Conversion and Management (2017), V. 133; PP. 458-476, https://doi.org/10.1016/j.enconman.2016.10.066  
  • M.E.-A. Slimani, M. Amirat, S. Bahria, I.Kurucz, M. Aouli, R. Sellami. Study and modeling of energy performance of a hybrid photovoltaic/thermal solar collector: Configuration suitable for an indirect solar dryer.  Energy Conversion and Management (2016), V. 125; PP. 209-221, https://doi.org/10.1016/j.enconman.2016.03.059
  • S. Bahria, M. Amirat, A. Hamidat, M. El Ganaoui,  M.E.-A. Slimani. Parametric study of solar heating and cooling systems in different climates of Algeria – A comparison between conventional and high-energy-performance buildings. Energy (2016), V. 113; PP. 521-535, https://doi.org/10.1016/j.energy.2016.07.022   
  • M.E.-A. Slimani, M. Amirat, S. Bahria. Study and modeling of heat transfer and energy performance in a PV /T hybrid collector with double passage of air.  International Journal of Energy for a Clean Environment (2015), V. 16 (1-4); PP 235-245, https://doi.org/10.1615/InterJEnerCleanEnv.2015015642    
  • M.E.-A. Slimani, M. Amirat, S. Bahria. Analysis of thermal and electrical performance of a solar PV/T air collector: Energetic study for two configurations.IEEE Xplore (2015), PP. 1- https://doi.org/10.1109/CEIT.2015.7232999    
  • M.E.-A. Slimani, M. Amirat, S. Bahria. ÉTUDE ET MODELISATION THERMOELECTRIQUE D’UN CAPTEUR HYBRIDE PV/T A AIR. Sciences & Technologie B – N°44, (2016), pp 63-68. http://revue.umc.edu.dz/index.php/b/article/view/2143
  •  A. IDDA,  M.E.-A. Slimani, S. BENTOUBA, Y. HAMMAOUI. Différentes Configurations du Système PV pour l’Alimentation Sans Interruption (ASI): Application au Relais GSM.  Journal of Advanced Research in Science and Technology; 4 (2) (2017): PP. 574-582 https://www.asjp.cerist.dz/en/article/25914 
  • A. Salmi, M.  Elajrami,  M.E.-A. Slimani. Crack growth study under thermo-mechanical loads: parametric analysis for 2024 T3 aluminum alloy. Frattura e Integrita Strutturale ; 13 (50) (2019) : PP. 231-241. https://doi.org/10.3221/IGF-ESIS.50.19  
  • S. Chikhi,  M.E.-A. Slimani. Hydrodynamic Effect on the Iso-octane Steam-Reforming in a Monolithic Reactor Channel. Journal of Management Science & Engineering Research; 2(1) (2019): PP. 5-12. https://doi.org/10.30564/jmser.v2i1.599 
  • D. Alihellal, L. Chibane,  M.E.-A. Slimani. Modeling and Simulation of the Deactivation by Sintering of the Co-balt Catalyst during the Fischer-Tropsch Reaction. Journal of Mechanical Engineering Research; 2(1) (2019): PP. 1-9. https://doi.org/10.30564/jmer.v2i1.277 
  • C. Mebarki, E. Djakab, S.M.K. El Hassar,  M.E.-A. Slimani. Impact of glazing type and orientation on the optimum dimension of windows for office room in hot climate. Journal of Architectural Environment & Structural Engineering Research; 1(1) (2018): PP. 10-15. https://doi.org/10.30564/jaeser.v1i1.271 

EDUCATION

  • Bachelor's degree in Energy Physics 2008 - 2011 Faculty of Science and Technology, Ahmed Draya University ( First class, Valedictorian) Adrar - Algeria 
  • Master's degree in Energetic and Fluid Mechanics 2011 - 2013  Faculty of Physics, University of Science and Technology (USTHB) (First class, Valedictorian) Algiers - Algeria
  • PhD degree in Energetic and Fluid Mechanics 2013 - 2017 Faculty of Physics, University of Science and Technology (USTHB) Thesis title: Study of an agricultural solar dryer equipped with a hybrid solar collector type "PV/THERM". Realization of a prototype and characterization. Algiers - Algeria 

COLLABORATIONS

  • ISES International Solar Energy Society Membership for the period 2018-2019 
  • SDEWES Centre International Centre for Sustainable Development of Energy, Water and Environment Systems 
  • Membership for the period 2015-2017 
  • ASTFE American Society of Thermal and Fluids Engineers  
  • Association from 2015present